Paving a Short Stretch of RoadDeLand, Florida
Road asphalt paving on a short stretch of residential street in DeLand, laid one lane at a time so neighbors could still get in and out. Both photos on this page were taken during the work.
Project at a glance
- Location
- DeLand, Volusia County
- Property
- Residential street
- Scope
- Short road section, one lane at a time
- Equipment
- Paver, dump truck and roller
Small Jobs
Will a paving company take on a short stretch of road?
We will. Short sections are some of the most useful paving there is, and plenty of them never get done because nobody wants to quote them.
This was a short run of residential street in DeLand. In this frame the paver hopper is full and the new lane runs away from the camera, black and even, while the old surface on the right waits its turn. A roller works further down the road, and the houses sit close to the curb on both sides.
Jobs like this come from private roads, the last block of an HOA street, the stretch in front of a few homes that the rest of the repaving skipped, or a road torn up by utility work. Each one needs the same equipment as a big job. The paver, the trucks and the roller all show up whether the job is a few hundred feet or a mile. Our asphalt paving page covers residential roads and the base work underneath them.
One Lane at a Time
How do you pave a road and still let neighbors get out?
One lane at a time. The paver works one side while traffic squeezes by on the other, and then they swap.
Here our dump truck sits in the unpaved lane with its bed raised, feeding hot mix into the paver ahead of it. The fresh lane in the foreground is already down. The truck carries our name and its US DOT number on the door.
Neighbors still have to get to work, and mail, trash pickup and school buses keep running all day. The crew keeps the open lane clear and lets cars through whenever the trucks are out of the way, and the swap from one lane to the other happens fast. Fresh asphalt is soft at first, so cars wait until the roller has finished a lane before they drive on it. A tire mark pressed into warm asphalt stays for the life of the road. Our asphalt paving in DeLand page covers the neighborhoods we work in close to home.
Cost
Why does a short stretch of road cost more per foot than a long one?
Because the setup costs the same. Moving a paver, a roller and a few dump trucks to the site, plus a full crew, is the same day of work whether the road is short or long.
On a long job that setup spreads across thousands of square feet. On a short one it lands on a few hundred. That is why neighbors on the same street sometimes go in on a section together, and why it pays to ask whether nearby driveway or patch work can be done the same day.
What does not change is the standard. Two inches of compacted asphalt, edges finished by hand, and a one year material warranty, the same as on a big job. Juan Mendoza, who owns M&S Asphalt Paving, has 22 years in asphalt, including DOT road work, and short roads get the same attention from him as long ones. If your road also has potholes or broken edges past the section you want paved, our asphalt repairs page covers what can be patched and what should be paved.
Want to see a longer road job?
On this DeLand street, the crew milled and overlaid the road half a lane at a time so it stayed open, and there is video from the job.
Have a short road or private drive that needs paving?
Call and tell us where it is and how long it runs. We look at the surface and the base, then give you a straight price with the scope written out, in English or Spanish.
Call us today (386) 215-7466